DirekTronik Telecom Test PDA, User Manual

Page: 26 / 32

20
Click "Open" to turn on the VFL, and click "Close" to turn off the
VFL. CW/2Hz is the switch button of the continuous and
modulated light, the tester can memorize the VFL mode
automatically.
The output power is 1mw/3mw/5mw/10mw (optional).
3. Gigabit Speed Test
1. Gigabit Speed Test Initialization
Function Description: Gigabit speed test module power up and
do some initialization work.
Instructions: Connect cable to the tester port and set the
network card, and then wait for initialization. Configure the
network parameter.
2. Start to Test
Instructions: In the Speed test interface, set up the speed test
IP address and number of thread, click "Start", the test data will
be displayed.
3. Exit
Instructions: click “Stop” button and return back menu.