Operating Instruction
7
7.3 LCD screen introduction
Device Startup interface(picture-1)
Channel interface
(picture-2)
7.3.1 Input / output channel key operation
Channel
Button method
Any Key
The first operation of the button can wake up the screen and complete the key function while the
blue button light will light up.
Input 1-8
Directly press the number key, such as input channel 1, and select "1" to press (only when
the output port is selected, the input channel number will be valid)
Output 1-8
Directly press the number key, such as the output channel 5, select the key "5" and press it again
to cancel the selection; Long press output any channel number to select all channels, and long
press again to cancel. After press the button, no next operation is performed within 10 seconds,
and the operation state ends.
MENU
Function Button; Enter the function option or back to previous option. Long press back to
function option, the next step is not performed for 30 seconds, screen back to select channel
interface
ENTER
Confirm Button: enter function selection mode
UP
Button for UP option
DOWN
Button for NEXT option
PRESET
Quick selection scene button
LOCK
Long press lock (button built-in blue light on), Long press again to cancel lock (button
built-in blue light off)
