Operating Instruction
21
7.5.3 Menu settings
You can set menu time, Select-run, LV-Read.
1
）
Time: No next operation within 30s and return to the channel interface.
2
）
Select-run: The default is Disable, Press the button to switch parameters to complete the setting.
No need press “Enter”.
3
）
LV-Read: The default level is 1. It's not possible to switch level directly, Unless you get client
access and then switch by command. (Note that a low level can't set a high level)
Operation instructions
：
①
Select“Config”, Press“ENTER”
②
Press “UP” “DOWN” button to select“Menu”, Press“ENTER”
③
Press “UP” “DOWN” button to select“Time”, Press“ENTER”
④
Press “UP” “DOWN” button to select the time you need.
⑤
Press “MENU”, Press “UP” ”DOWN” button to select“Select-run”, Press“ENTER”
⑥
Press “UP” “DOWN” button to select“Disable/Enable”, settings done
Menu settings interface
(picture-35)
Exit menu Time settings interface
(picture-36)
