page 21 of 32
MI6 Manual - Version 1.1
CHAPTER 4: Operation
Mixing
The volume of the 16 audio channels in the mix is adjusted by 16 potentiometers.
Each channel can be muted in the mix individually by pressing the particular push
button.
SIG
channel ‘1’ to
channel ‘16’
LED (green) - indicates the signal level of the
particular audio channel.
(OFF) - signal level < - 80 dBFS
(ON) - signal level > - 80 dBFS
The light intensity of the leds depends on the audio level.
MUTE
channel ‘1’ to
channel ‘16’
LED (red) - indicates the mute state of the
particular audio channel.
(OFF)
- channel mute ON
(ON)
- channel mute OFF
(blinking) - ISOLATE active, channel mute ON
MUTE
channel ‘1’ to
channel ‘16’
Push button - toggles the mute state of the
particular audio channel.
Press to mute / unmute the channel.
Mute-Properties
• Mutes are stored separately with each input bank,
i. e. there are 64 independent mutes.
• Only channels from the selected bank can be mixed to the monitor bus.
• Muted channels are stored in the background when ‘ISOLATE’ is activated
- see „Isolate“ on page 22.
• Mutes are stored in the device and mute selection is resumed after
power cycle.
