page 20 of 32
MI6 Manual - Version 1.1
CHAPTER 4: Operation
Monitoring Mode (Mono / Stereo)
The channel routing to the mix bus provides two options: MONO and STEREO.
The mode is toggled by pressing the push button.
STEREO
LED (green) - indicates the monitoring mode.
(OFF) - odd and even channels are routed to both sides
(left & right)
(ON) - odd channels are routed to left (L)
even channels are routed to right (R)
STEREO
Push button - toggles the monitoring mode.
Press to toggle between STEREO and MONO.
Press and hold > 2 s to override key lock.
Key Lock
The bank selection and mono/stereo selection can be locked to prevent accidental
changes.
To enable key lock:
• switch device on
• while the fi rmware version is displayed, press either push button
‘INPUT’ or ‘STEREO’ to toggle key lock.
Code
Meaning
LED Code
key lock inactive
all ‘BANK’ leds ON
key lock active
all ‘BANK’ leds OFF
To override active key lock temporarily:
• press the push button (‘INPUT’ or ‘STEREO’) > 2 s
• the corresponding led(s) will start blinking
• press the push button short to change the selection
