page 17 of 36
ANNA-LISA Manual - Version 1.1
CHAPTER 4: Operation
Global Control
The power switch is on the side panel. LEDs on the top panel inform about battery
level or charge state.
Power
1 Switch
Move slider to switch device ON or OFF.
USB
USB 2.0 socket (Type B)
Connect here for charging the battery.
Signal Connections
ANNA-LISA provides two MADI I/Os:
• coaxial BNC port
• SFP cage to connect other media carrying MADI signals, e.g. fi bre (single
mode/multi mode), different wavelengths etc.
BNC OUT / IN
2 x BNC socket (coaxial)
OUT: MADI output (64 ch), connect for MADI output
signal here.
IN: MADI input (64 ch), connect MADI input signal
here.
SFP
1 x SFP cage*
Insert SFP module here and connect MADI input/
output
*
empty cage, module not included in delivery - see „Accessory“ on page 13.
2
1
2
1
