
page 36 of 48
ANDIAMO Hardware Guide - Version 1.0
CHAPTER 5: Menu Navigation
CHAPTER 5: Menu Navigation
To setup the converter the menu mode has to be entered first. The unit will switch
back to idle mode automatically after timeout.
• Press the button <SELECT> longer than two seconds to enter the menu
mode
• Press <SELECT> to cycle through the menu.
• Press <SET> to change a setting.
• Press <SET> longer than two seconds to toggle the Matrix Mode
NOTE
Blinking LEDs are also used to indicate an error (e.g. missing sync). Concentrate on
the section where one LED is blinking and the remaining LEDs are glowing weak.