page 14 of 44
D.O.TEC
®
ANDIAMO 2.AD Hardware Guide - Version 1.0
DirectOut Technologies
®
CHAPTER 3: Installation
© 2013 DirectOut GmbH
warning
Avoid damage from condensation by waiting for the device to adapt
to the environmental temperature. Proper operation can only be
guaranteed between temperatures of 5º C and 45º C and a maxi-
mum relative humidity of 80%, non-condensing.
Ensure that the unit has suffi cient air circulation for cooling.
Retain the protective cap if the optical port is unused. This will pro-
tect against soiling which can lead to malfunction.
ChAPtER 3: installation
installing the device
1.
Open the packaging and check that the contents have been
delivered complete and undamaged.
2.
Fix the device in a 19’’ frame with four screws, or place it on
a non-slip horizontal surface.
4.
Connect signal cable for the MADI signals.
3.
Remove the protective cap from the optical MADI port(s)
before use.
ANDIAMO 2.AD - SC /SC version (optical / optical)
ANDIAMO 2.AD - BNC / SC version (coaxial / optical)
