Directed Directechs FORD11, Installation Manual

Page: 11 / 23

Wiring Diagram - without OEM Remote Start and without T-Harness
Refer to "Pre-installation and application warnings" on page 4 and "Vehicle wiring reference chart" on page 12 for important information on this installation.
Parking Lights Interrupt (vehicle side): Lt. Green : 8
(-) Parking Lights Output: Lt. Green/Red : 7
Parking Lights Interrupt (conn. side): Lt. Green/White : 9
(-) Ground: Black : 10
Headlight Switch
HS CAN 1 Low: Tan : 1
HS CAN 1 High: Tan/Black : 2
HS CAN 2 High: Orange/Green : 4
HS CAN 2 Low: Orange/Brown : 3
Siren
Hood Pin
Parking Light Interrupt: Pin 4
(+) 12V Input: Red : 6 & 12
(-) Hood Input: Gray : 21
(+) Siren Output: Brown/Red : 11
Cut
HS CAN 2 Low: White , pin 19
HS CAN 2 High: White/Blue or Blue , pin 20
HS CAN 1 Low: Gray , pin 17
HS CAN 1 High: Green , pin 18
22
8
10
12
4
2
4
4
2
DS4+
DS4
Slide
to open
Proper Fuse
Positioning
DS4+ DS4
5
15
5
15
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & STAR T (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & STAR T (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & STAR T (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & STAR T (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & STAR T (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & STAR T (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
It is important to check that the
fuses are positioned correctly.
(+)12V: Pin 24
(-) Ground: Pin 14
Gateway Module
(black conn. on OBDII connector)
(-) Parking Lights:
Gray or Yellow , pin 11
Wiring diagram
11
DS4+ FORD11
© 2017-05-08 Directed. All rights reserved.