P.18
User Guide
Intrusion Codes via horn
The system monitors the following:
•
Doors
•
Hood
•
Ignition
Note:
If an intrusion has occurred the
HORN
will sound for a maximum of 1 minute
If an intrusion has occurred and pressed, the horn provides an intrusion code corresponding to
the type of intrusion that occurred.
Diagnostic table:
1x = power interruption
4x = Doors intrusion
3x = Hood
6x = Ignition
Missing a Start or a Stop Confirmation
If you have not received a Start or the Stop confirmation after pressing the button, pressing the
button within range of the remote starter’s signal will refresh the display and will confirm if the
vehicle was started or stopped.
If no start confirmation was received:
•
Press the button:
The remote’s icon will start flashing
The icon and runtime time countdown will be displayed.
If no stop confirmation was received:
•
Press the
button:
The will be displayed
The remote’s icon and the runtime countdown will disappear.
Multi-Level Features
The multi-level features allow you to access different features of your vehicle or of a second car by
pressing the
button once, twice or three times. For convenience purpose, the order of
LEVELS
and
MENU
can be re-arranged through
FBPRO setting (page-6)
Features:
•
MENU:
see
page-6
for complete lists of MENU available.
•
Basic features: AUX 2
, Cold Weather mode, Swap Start, Temperature request
•
Multicar Operation:
Allows the owner to control both vehicle equipped with the same
remote starter model.
•
Customized feature:
Your installer can add customized features such as turning on the
radio, opening sliding doors, etc.