background image

17

©

2000 Directed Electronics, Inc.

Passive Mode or 

Active Mode

. In Passive Mode the optional

Failsafe

®

Starter Kill will automatically activate 30 seconds

after the ignition has been turned off.

Ignition switch-controlled door-locking 

on

or off. With this

feature on, the doors will lock 3 seconds after the ignition

key is turned on, and unlock when the ignition key is turned off.

Passive Locking or 

Active Locking 

(doors lock only with the

transmitter). With Passive Locking, the vehicle doors lock

automatically 30 seconds after the ignition has been turned

off. Passive Locking can only be selected when the system

has been programmed for Passive Mode.

The horn honk confirmations for locking and unlocking can

be programmed 

on

or off. In order for this feature to be pro-

grammed on, the horn must be connected to the system.

Glossary of Terms 

Control Unit

: The “brain” of your system. Usually hidden under-

neath the dash area of the vehicle. It houses the microprocessor

which monitors your vehicle and controls all system functions.

Failsafe

®

Starter Kill:

An automatic switch controlled by the sys-

tem which, when installed, prevents the vehicle’s starter from

cranking whenever the system is armed. The vehicle is never pre-

vented from cranking when the system is disarmed, in Valet

®

Mode,

or if the starter kill switch itself fails. This feature is optional.

Summary of Contents for Avital 3200


























Reviews: