background image

3

© 1996 Directed Electronics, Inc.

What is included

The control module

A pair of two-button transmitters

A Stinger

®

DoubleGuard

®

dual-output shock sensor

The Revenger

®

Soft Chirp

®

six-tone programmable siren

The red Status LED indicator light

A push-button Valet

®

switch

Your warranty card

FailSafe

®

starter kill (Ready feature, may require additional labor).

C

ONGRATULATIONS

on your purchase of a state-of-the-art vehicle securi-

ty system. This system has been designed to provide years of trouble-
free operation. Due to the complexity of this system, it must be installed
by an authorized dealer only. Installation of this product by any other
person other than an authorized dealer voids the warranty. All dealers
are provided with a preprinted dealer certificate to verify that they are
authorized.

T

HE SYSTEM REQUIRES NO SPECIFIC MAINTENANCE

. Your remote control is

powered by a miniature 12V battery, type GP23A, that will last about a
year under normal use. When the battery weakens, operating range will
be reduced and the LED on the remote will light dim.

Y

OUR

W

ARRANTY

card must be returned and the bar code serial number

must not be removed. If the warranty card is not returned you don’t have
a warranty. It is also necessary to keep your proof of purchase which
reflects that the product was installed by an authorized dealer. Make
sure you receive the warranty card from your dealer.

T

HIS OWNER

S GUIDE

should help you to get the most out of your system.

Please take the time to read it thoroughly, prior to using the system.

Summary of Contents for 737T





















Reviews: