Analog harness (H3), 18-pin white connector
Conn./Pin
Color
Description
H3/1
Lt. Blue/Red
No Connection
H3/2
Black/White
(-) Parking Brake Input (manual transmission)
2
H3/3
Gray
(-) Hood Input
2
H3/4
N/A
No Connection
H3/5
Gray/Black
(+) Glow Plug Input
2
H3/6
Violet/White
(AC) Tach Input
2
H3/7
Dark Blue
No Connection
1
H3/8
Brown/Black
(-) Horn
1
H3/9
Red/White
No Connection
1
H3/10
White/Green
(-) Door Input
2
H3/11
Yellow/Green
(+) Door Input
2
H3/12
Blue/Red
No Connection
H3/13
Light Blue
(-) Trunk Trigger Input
2
H3/14
Pink/Yellow
(-) Activation (start) Input
H3/15
Dark Green
No Connection
1
H3/16
Brown/White
(+) Brake Input
2
H3/17
Brown
(+) Siren Output
1
H3/18
Blue/White
(-) Ground When Running (status) Output
1
MC501 harness (H4), 8 thick-gauge wires (optional)
Conn./Pin
Color
Description
H4/1
Pink/White
No Connection
3
H4/2
Red/White
No Connection
H4/3
Pink
(+) Ignition Input/Output
H4/4
Red
(+) 12V Input
H4/5
Orange
(+) Accessory Output
H4/6
Red
(+) 12V Input
H4/7
Green
Starter Input (from key switch)
4
H4/8
Violet
(+) Starter Output (to starter)
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
2. These connections are only required if the corresponding statuses are not supported by the firmware. See "Vehicle application guide" on page 5 for a
list of compatible features.
3. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
4. The Green wire is only required for starter disable and anti-grind applications.
7
Directed Digital Solutions HK18
© 2019-09-20 Directed. All rights reserved.