Module programming
Refer to "LED diagnostics and troubleshooting" on page 14 for more information and for troubleshooting purposes.
To connect the module:
1
Please
ensure
that the vehicle is in a safe location and cannot move forward during
programming. For vehicles equipped with a manual transmission, make sure the gearshift
lever is in the neutral position.
2
Connect
all the harnesses to the Directed Digital Solutions,
EXCEPT
the 12-pin main power
harness.
Connect all but the
12-pin harness
3
Connect
the 12-pin main power harness, and wait until the LED turns ON solid red.
Note:
To skip the transponder programming and use convenience features only, press
the programming button 5 times. The LED turns ON solid orange, then proceed to step 4.
(This feature can only be used with vehicles that are
NOT
equipped with an OEM alarm.)
Must be connected LAST
&
Solid
4
Insert
the first key and
turn
it to the ON position. The LED will flash green
Wait
at least 3 seconds but no more than 10 seconds then
remove
it.
If the transponder programming was skipped,
the LED turns ON solid
orange for 3 seconds then shuts OFF when programming is done.
Important!
Proceed with the next step within 5 seconds.
&
&
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
1st Key OUT
ON
OFF
START
1st Key IN
ON
OFF
START
1st Key IN
ON
OFF
START
1st Key IN
ON
OFF
START
2nd Key OUT
ON
OFF
START
2nd Key IN
ON
OFF
START
2nd Key IN
ON
OFF
START
2nd Key IN
ON
OFF
1st
Key at ON
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
1st Key OUT
ON
OFF
START
1st Key IN
ON
OFF
START
1st Key IN
ON
OFF
START
1st Key IN
ON
OFF
START
2nd Key OUT
ON
OFF
START
2nd Key IN
ON
OFF
START
2nd Key IN
ON
OFF
START
2nd Key IN
ON
OFF
1st
Key out after 3-10 sec.
Flashes
5
Insert
the second key and
turn
it to the ON position. The LED will flash
green.
Wait
at least 3 seconds but no more than 10 seconds then
remove
it.
Note:
In some vehicles, it may be necessary to turn the key to the ON
position once more before proceeding to the next step.
Important!
Proceed with the next step within 5 seconds.
&
&
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
1st Key OUT
ON
OFF
START
1st Key IN
ON
OFF
START
1st Key IN
ON
OFF
START
1st Key IN
ON
OFF
START
2nd Key OUT
ON
OFF
START
2nd Key IN
ON
OFF
START
2nd Key IN
ON
OFF
START
2nd Key IN
ON
OFF
2nd
Key at ON
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
1st Key OUT
ON
OFF
START
1st Key IN
ON
OFF
START
1st Key IN
ON
OFF
START
1st Key IN
ON
OFF
START
2nd Key OUT
ON
OFF
START
2nd Key IN
ON
OFF
START
2nd Key IN
ON
OFF
START
2nd Key IN
ON
OFF
2nd
Key out after 3-10 sec.
Flashes
6
Wait
for at least 3 seconds, but no more than 10 seconds, and
press
and
hold
the programming button.The vehicle ignition will be triggered.
Important! Release
the programming button as soon as the LED stops flashing orange.
If you wait too long to release the programming button, you will have to restart the
programming sequence.
The LED turns ON solid green for 3 seconds, then turns OFF.
Release
the programming button.
&
Solid
Off
&
Press & Hold
7
Pair
remotes (if applicable). For information on how to pair a specific remote, please
refer to its corresponding owner documentation, which can be found inside the product
packaging of the complete system or on www.directechs.com.*
Pair
remotes*
12
Directed Digital Solutions FORD13
© 2020-04-28 Directed. All rights reserved.