Part 2 - Remote Setup
29
Video Loss
Select
Video Loss
to configure video loss event settings.
With video loss event enabled, video loss will be
assumed as an event.
•
Camera Channels
: Select which cameras to apply the
video loss to.
•
Ignore interval
: With Ignore interval configured, no
event log or notification is generated for video loss
taking place during a period of time following a video
loss event.
•
Use Ignoring Time
: Define the event ignoring time.
Video loss taking place during the defined time range
will not be assumed as events.
•
Event Action:
Select a video loss event alert action.
-
Send Email:
Select to send an email.
-
Remote Callback:
Select this option to send a
message to a remote system and then select which
system to send the message to.
• Not supported from the IDIS Web program.
• The encoder must be registered to the remote
system in order to use the
Remote Callback
feature.
Event Action
settings must be configured correctly
in order to perform event actions.
System Event
.
Select
System Event
and configure system event
settings. With system event enabled, system status will
be checked periodically and corresponding alerts will be
generated.
•
System Alive
: Select to check the system status and
then set up a schedule.
-
Send Email
: Select to send out an email when the
system comes on line.
-
Remote Callback
: Select this option to send a
message to a remote system when the system
comes on line and then select which system to send
the message to.
•
and
Remote Callback
settings under
Event Action
must be configured correctly in
order to send out emails and messages.
•
Remote Callback
is not supported on IDIS
Web.
• The encoder must be registered to the remote
system in order to use the
Remote Callback
feature.
