Part 2 - Remote Setup
23
Streaming
•
Camera Channels
: Select which cameras to apply the
streaming to.
•
Primary, Secondary, Tertiary, Quaternary
:
Multistreaming is supported. (priority: Primary >
Secondary > Tertiary > Quaternary). Enable/disable
streaming use. The lower stream settings may change
depending on higher stream settings. The tertiary
stream and the quaternary stream may not be able to
use a resolution and fram rate settings depending on
higher stream settings(refer to the table below).
Primary
Secondary
Tertiary
Quaternary
Resolution
ips
Resolution
ips Resolution ips Resolution ips
720x480 (NTSC)
720x576 (PAL)
30
25
720x480 (NTSC)
720x576 (PAL)
30
25
640x360
(NTSC)
1
360x240
(NTSC)
1
•
Compression
: Choose the streaming compression
method.
•
Resolution
: Choose a resolution setting for video
streaming.
•
Quality
: Choose a quality setting for video streaming.
•
Bitrate Control
: Choose a bitrate control mode for
H.264 compression.
-
VBR (Variable Bitrate)
: Bitrate varies depending
on motion changes in the video. Less movement
places less load on the network and takes up less
storage space.
•
Frame Rate
: Choose a frame rate setting for video
streaming.
If multiple users are connected to the encoder, the
increase in bandwidth use can lower the frame rate.
•
Intelligent Codec:
Lower bitrate by using the
intelligent codec.
