Part 2 - Remote Setup
14
Configure basic video encoder settings and all other
system settings.
Screen images may vary depending on the model.
Camera Protocol
Video encoder supports
DirectIP
and
IDIS
protocols.
•
DirectIP
protocol:
- Using with a DirectIP NVR enables camera use
without the need to configure network settings.
- The DirectIP NVR also allows you to control all
camera settings directly from the NVR, without the
need for a computer.
For more information on configuring camera settings
from a DirectIP NVR, refer to the DirectIP's
operation
manual
.
•
IDIS
protocol:
- Control the camera over the network from software
installed on a computer or a separate NVR.
- Ideal for using the camera over the network from a
remote location.
Switching Protocols
1
Launch the IDIS Discovery program and from the list,
select a video encoder whose protocol you wish to
change.
2
Click on the
Setup
icon and then select
Setup
→
Protocol Setup
.
• Alternatively, you can right-click on the mouse and
select
Protocol Setup
.
3
From the
Protocol Setup
screen, select the desired
protocol and then click
OK
.
4
This will activate the selected protocol. You can
check each encoder's protocol on the IDIS Discovery
program.
"This user manual was written based on the IDIS
protocol."
Part 2 - Remote Setup
