Part 1 - Remote Setup
24
Select
to send out emails.
•
SMTP Server/Port
: Enter the SMTP server’s IP address
(or domain name) and port number you received
from the network administrator. If a DNS server has
been set up during network configuration, you can
enter a domain name instead of an IP address.
•
SMTP Server Test:
Enter the SMTP server and click
the Test button. During normal operation, a pop-up
window is displayed asking to confirm the e-mail has
been received. Connect to the mail server and check if
the email has been received.
•
Use SSL/STARTTLS
: If using an SMTP server requiring
an SSL or STARTTLS connection, select
SSL
or
STARTTLS
option.
•
Authentication
: Enter a user ID and password if user
authentication is required by the SMTP server.
•
Sender/Recipient(s)
: Enter the sender and recipients’
addresses. (Up to 10) The addresses must be properly
formatted and include the @ symbol.
Remote Callback
Select
Remote Callback
to send callback messages to a
remote system.
•
Not supported from the IDIS Web program.
•
The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
•
IP Address
: Enter the IP address and port number of
the remote system that will receive the messages.
•
Retry
: Designate how many reattempts to make if
message delivery fails.
