1/2
INSTRUCTION PAPER
SELECTA | Dining table 80x80
CONTENT
8x bolt (M8x40mm)
13x bumper
2x alu legs
1x table top
13x washer (2mm)
1x alu table top support
8x spring washer (M8)
13x washer (1mm)
8x washer (M8)
1x hex key (6)
A
E
I
B
F
J
C
G
D
H
STEP 1: ASSEMBLE LEGS
STEP 2: TURN TABLE
Use the hex key (D) to screw the the aluminium legs onto the table
top (L) as shown in the picture. Make sure you follow the correct
order as indicated by the letters in the picture. Repeat this action for
the other side.
Turn the table carefully to its normal position with at least 2 persons.
Start by unpacking everything carefully. Make sure to cover the fl oor to prevent any damage or scratching (you can use the cardboard box for this).