Dionex UltiMate 3000 Series, Operating Instructions Manual, Page: 52 / 236

UltiMate 3000 Series:
SD, RS, and BM Pumps
Page 38 Operating Instructions

Timebase (only DGP-3600)
Select the timebase to which the related the pump is assigned. The default setting is the
timebase in which the pump is installed. To change the setting, click the arrow next to
the Timebase box and click a different timebase on the list. The list shows all
timebases for that server.

WPS Purge Port
1
If the UltiMate 3000 system includes a WPS-3000RS or WPS-3000SL autosampler,
specify whether the pump is purged through the membrane pump of the autosampler.
The default setting is <None>.

All pumps except DGP-3600
Click UM3WPS_PURGE0 to connect the pump fluidically with the autosampler.

Only DGP-3600
To connect both pumps of a DGP-3600 fluidically to the autosampler, click
UM3WPS_PURGE0 for one pump and UM3WPS_PURGE1 for the other pump.
To connect only one pump to the autosampler, click
UM3WPS_PURGE0 for the
pump to be connected and click < None > for the other pump.
For more information about how to purge the pump by using the autosampler, see
page 54.
1
For patent reasons, this function must not be used in the following countries: China, Germany, Great Britain, Japan, and the USA.