(314) 205-3033
WWW.DIODEDYNAMICS.COM
RGBW™ Demon Eyes (Universal)
Installation Guide
Thank you for your purchase of this unique product for your
projector housing! With these modules, you will be able to add
full multicolor functionality to your projector housing. This guide
describes the installation process for installing the Demon Eyes
in a Mini H1 projector housing. The Demon Eyes can be custom
mounted with adhesive for any other size projectors.
1. To begin, attach the Demon Eye to the top of the
included bracket, using one of the included locking
screws and locknuts. Ensure the locknut is on the
bottom side of the Demon Eye. Be sure to thread the
locking screw and locknut first and then tighten using
pliers and a small Philips screwdriver.
2. Next, mount the Demon Eye inside the projector
housing, ensuring the Demon Eye board is inside the
shroud. The bracket can be mounted on either the
front or the back side of the projector housing.
Using the mounting holes and included locking screws,
secure both sides of the bracket to the housing. Again,
thread the locking screws and locknuts and then
tighten using pliers and a small Philips screwdriver.
Tools Needed:
Pliers, small Phillips Screwdriver
WARRANTY
3 YEAR
Please note:
Headlights must be opened before proceeding with installation. Professional installation
is strongly recommended. Please contact Diode Dynamics if you need assistance locating an installer.
PAGE 1
See back for further instructions.
