2015-17 Subaru WRX/STi
C-Light LED Halos Installation Guide
Please contact
Diode Dynamics
should you have any questions about the installation
or wiring process, at
314-205-3033
(9a-5p CST) or
PAGE 3
(314) 205-3033
WWW.DIODEDYNAMICS.COM
Scan the QR code to link to our installation video online!
NEED MORE HELP?
We’ve taken the time to test our products on your vehicle. We can
guarantee compatibility and fitment the first time – no guessing
game! If you need more help with installation, watch our step-by-step
video to walk you through the process.
GUARANTEE
100% SATISFACTION
Visit
www.diodedynamics.com
to find more products for any vehicle.
WARRANTY
3 YEAR
8. First, connect the board connector to the Switchback driver output. Connect the
Switchback driver input to the pigtail. Finally, tap the bare wires to the wiring harness.
See Wiring Method Diagram below.
The black wire must be grounded before any
function will work.
IMPORTANT: DO NOT plug the LED panel directly into pigtail without the driver. The
LEDs must be plugged into driver first to control the power.
9. Mount driver and tuck all wires. Driver should be mounted outside of headlight for
serviceability, in a location away from the engine block to avoid excessive heat buildup.
10. Test thoroughly, reseal headlight and reinstall onto vehicle.
Wiring Instructions
