UC8000 IPPBX User Manual
29
Figure 5.3.13 Disk Manager
Note:
UC8000 currently does not support U disk/SD card.
5.3.14 Reboot
On the
System -> Reboot
interface, users can click Restart Device to reboot the
UC8000 IPPBX. After the device is rebooted, those configurations that have been
saved will remain unchanged.
Figure 5.3.14 Reboot Device
Note:
When Restart Device is selected, it means that the UC8000 reboots, the
docker container and the host does not reboot.
5.4 Network
The UC8000 utilizes the IP address of the server's physical machine network
interface, so the UC8000 does not require network configuration; If users want to use
the active and standby feature, they can configure a floating IP address for active
and standby management.
The network menu mainly manages/configures network-related functions, mainly
including: floating IP management, access control, firewall, diagnostics, DDNS, static
route and Fail2ban.
5.4.1 Floating IP Management
The floating IP takes effect only when the active and standby configuration is enabled,
and the floating IP is used for management and service of the double-device active
