Dinstar SBC3000, User Manual

Page: 67 / 71

3 Configurations on Web Interface
SBC3000 Session Border Controller
Copyright©2011-2018 Dinstar
61
Figure 3-47 Backup & Restore
Table 3-35 Backup & Restore
Backup
You can download the configuration data to be taken as backup. Select any of the
checkboxes on the right of Service Config, Certification File and Network Config, and
then click Backup
Restore Choose a backup file, and then click Restore .
Factory
Settings
Click Factory Settings , and the configurations of the SBC3000 device will become factory
settings.
License
On the System

License page, the license information, including license beginning time, license expiry time,
maximum concurrent calls, maximum transcoded sessions, maximum registered users, RPS ( registrations per
second) and CPS( calls per second), is displayed. The SBC3000 device will not accept registrations and calls after
the license expires.
Figure 3-48 License Information
Certificate
On the System

Certificate page, you need to upload a certificate to ensure the secure login to the Web interface
of the SBC3000 device. You cannot log in the device until you has uploaded a certificate.