3 Configurations on Web Interface
SBC300 Session Border Controller
Copyright©2011-2018 Dinstar
16
Memory
The occupancy rate of memory at current time
Temperature
The temperature of the CPU for MCU (Main Control Unit)
Table 3-4 Device Information
MFU
(Main Function Unit)
CPU
The CPU occupancy rate of MFU at current time
Memory
The memory occupancy rate of MFU at current time
Call
The number of current calls that are being processed by
MFU’s CPU
Temperature
The temperature of the CPU for MFU
MCU
(Main Control Unit)
Network Ports
（
Admin/GE0/GE1/GE2/GE3
）
All the network ports on the MCU, among which green
ones refer to those network ports in use, while gray ones
are idle.
Table 3-5 General Information
Device Model
SBC300
Device Name
The name of the device, which can be modified on the ‘System
System Management’ page
Software
Version
The current software version No. running on SBC100
License Status
If the license is in its validity period, “Valid” will be displayed. If the license has expired,
“Invalid” is shown
License Expires
The remaining time of license validity
Current Time
The current time of SBC300, which can be modified or synchronized on the ‘System
Date
& Time’ page
Running time
The running time of the device since it is booted up
Note:
If the current time is still wrong after the system time has been synchronized or the device is restarted, it means the
battery inside the device runs low and you need to replace the battery with a new one. Besides, only the Admin port
can be used to synchronize time with NTP.
Access Network Status
Terminal users are registered to SBC300 through access network. The status of access network is always “true”,
which means the access network is normal and available.
On the
Overview
Access Network Status
page, detailed information about access network, including the status,
name, CPS (Calls Per Second), number of registered users, ASR (Answered Success Ratio), number of calls that
are being transcoded, number of current calls as well as number of total calls, are shown.
