Dinstar SBC1000, User Manual

Page: 67 / 71

3 Configurations on Web Interface
SBC1000 Session Border Controller
Copyright©2011-2018 Dinstar
61
The version file used for upgrade is generally named as ‘1.91.x.x.ldf’. Please do not use other products’ version
files to upgrade the SBC1000 device.
Figure 3-46 Mirror Upgrade
Backup & Restore
On the System

Backup & Restore interface, you can back up or restore all the configuration data, including
service configurations, network configurations and license & certificate. After the configuration data is restored, the
SBC1000 device will automatically restart.
Figure 3-47 Backup & Restore
Table 3-35 Backup & Restore
Backup
You can download the configuration data to be taken as backup. Select any of the
checkboxes on the right of Service Config, Certification File and Network Config, and
then click Backup
Restore Choose a backup file, and then click Restore .
Factory
Settings
Click Factory Settings , and the configurations of the SBC1000 device will become factory
settings.