Dinolift DINO XT II 160, Operating Instructions Manual

Page: 34 / 73

34
Operating instructions • DINO 160XTB II • 180XTB II • 210XTB II
4.3.2. Operating controls for the outriggers
Control levers for the outriggers
The start button for the outriggers is
located in the battery compartment on the
right-hand side.
The control levers for the outrigger valve
are located on the right-hand side of the
lift's chassis.
5
10
1
Front outrigger, right
2
Front outrigger, left
3
Rear outrigger, left
4
Rear outrigger, right
5
Activation button for the outriggers
10
Position indicator of chassis
4.3.3. Optional controls on the chassis
Signal lights for the outriggers
The signal lights at the outrigger control
centre indicate separately the status of
each outrigger limit switch.
54.1365
3
4
2
1
1
Signal light, outrigger 1
2
Signal light, outrigger 2
3
Signal light, outrigger 3
4
Signal light, outrigger 4
Remote control cable for the driving
device
The additional control unit is located in the
toolbox on the tow-bar.
5
1
3
2
4
1
Activation switch for the driving control
2
Drive forward
3
Drive backward
4
Swinging to the right/left
5
Emergency stop for the driving device
Remote control cable for the driving
device and the automatic levelling
The additional control unit is located in the
toolbox on the tow-bar.
2 1
4 3
4CB6413
5 6
1
4
8 7
10
2
3
9
1
Operating the left driving device roller
2
Operating the right driving device roller
3
Depressing the driving rollers
4
Lever switch for automatic levelling
5-8
Levers for individual control of the
outriggers
9
Signal light for the outriggers
10
Emergency stop of the driving device and
outriggers