Dino-Power DP6391, Instruction Manual, Page: 4 / 13

2
●
Know the special harm of the coating you are using.
●
Always wear protective glasses, gloves, clothing and musk recommended by the
manufacturers of coatings and solvents.
●
Actions of thrashing, knocking or throwing the cylinder of the coating machine are forbidden. If
the cylinder is found broken, it should be replaced with a new one. It is also recommended that
the cylinder should be replaced with a new one after being used for 5000 hours (or 3 years) to
ensure the safety.
●
The bolts connecting the cylinder, the upper cover and the lower cover of the cylinder must be
tightened as per the torque defined in the following table. If abnormities such as distortion and
sliding are found on bolts, they should be replaced with new ones as per the performance
ratings and specifications.
Between real product and the corresponding description in the instruction manual. Please take
actual product as standard. All modifications due to error correction or product improvement
will be explained by Dino-Power Industry & Trade Co., Ltd. at any time without notice. The
revised parts will be included in the second edition of the instruction manual.