Dino-Power DP6391, Instruction Manual, Page: 3 / 13

1
Safety Warning
●
This equipment must only be operated by trained personnel.
●
Every equipment has a specific use. Please consult the agent of Dino-power if you have any
questions.
●
Never attempt to modify the equipment, nor exceed the maximum working pressure of the
system.
●
Check the equipment everyday. Maintain or replace old or broken parts immediately.
●
Read the warnings provided by the manufacturers of coatings and solvents. Make sure that the
used coatings and solvents are applicable to the contact parts of the equipment.
●
Do not drag equipment with the high-pressure hose, nor put the high-pressure hose in places
of heavy traffic, on sharp edges, on moving objects and on hot surfaces.
●
Follow all relevant laws and regulations of local governments and the country regarding fire
prevention, electricity usage and safety.
●
Do not point the spray gun at anybody or any part of the body. Do not put your hand or finger on
the spray gun, nor block the crack or leak point with your hand, body, glove, or duster cloth.
●
The injury caused by high-pressure coating sprayed onto the skin may appear just as a cut, but
it is actually a severe injury. The victim should go to see a professional doctor immediately.
●
Before operating the equipment, please tighten all connectors and make sure that the trigger
safety of spray gun can be operated safely.
●
When the spraying is stopped, please lock the trigger of spray gun.
●
Check the high-pressure hose and connecting parts everyday. Replace broken parts
immediately. Do not repair broken high-pressure connecting parts, in which case the whole
pressure hose must be replaced.
●
The intake hose of air-driven motor must be tied up and firmly connected.
●
While the pressure is not released and the intake switch is opened, do not loosen the
connecting parts among coating pump, high-pressure hose and spray gun.
The equipment must be well grounded while being used. If there are electrostatic sparks or
you receive an electric shock, please stop spraying immediately until you find out the cause
and eliminate the trouble.
●
Keep the circulation of fresh air to avoid the accumulation of the flammable gases in solvents
and coatings during spraying operations.
●
In the spraying area, naked fire is forbidden. Do not smoke in the spraying area.
●
In the spraying area, do not turn on or off any light during spraying operations.
●
Do not start the gasoline engine in the spraying area.