10
V. Starting up the Generator
(1)
Remove the load from all output ends;
(2)
Switch energy-saving switch to "OFF";
(3)
Turn ventilation knob of fuel tank cap to
"ON";
Close
(4)
Turn combination switch control to "CHOKE
VALVE" position;
1.
Fuel is on;
2.
Ignition system is on;
3.
The choke valve is closed, and it is in normal
cool-generator OFF status.
eration
Choke
valve
Tip:
When hot engine is started up, it is unnecessary to close the choke
valve, but turn the combination switch to "RUN".
(5)
First gently pull startup handle, until guy cable is hooked tight,
and then pull it with effort.
Tip:
When pulling the hand starter, hold generator carrying handle firm, to
prevent the generator from overturning.
VI. Shutting Down the Generator
(1)
Turn the combination switch to "OFF" position;
(2)
After the generator has completely cooled down, turn ventilation
knob on fuel tank cap to "OFF".
