3590EKR, 3590EXP, 3590EXT, CPWE, CPWET series indicator
E-AF09_02_16.03_EN_U
57
13.3.3.3 STARTING OUTPUT WEIGHING THROUGH ID CODE
To enable this mode, one has to set the step
F.ModE >> totAL >> WEi.MEM
on “
Wei.Cod
” in the setup
(TECH.MAN.REF.).
Procedure
-
Select, if requested, the customer / material / vehicle to be linked to the output weigh.
-
To select the input weigh it’s possible to proceed in two ways:
1)
Directly type in the ID code and press F7
2)
Press F7: one enters the menu of the “open” input weighs:
LCD display
Select the desired weigh using the arrow keys
.
Confirm with
ENTER
or press
C
to exit.
13.3.3.4 STARTING OUTPUT WEIGHING THROUGH LICENSE PLATE
To enable this mode, one has to set the step
F.ModE >> totAL >> WEi.MEM
on “
PLAtE
” in the setup
(TECH.MAN.REF.).
Procedure
-
Select, if requested, the customer / material / vehicle to be linked to the output weigh.
-
Press
F7
, the display shows:
-
Then it’s possible to proceed in two ways:
1)
Enter the License Plate number and press ENTER
2)
Press ENTER: one enters the menu of the “open” input weighs
LCD display
Select the desired weigh using the arrow keys
.
Confirm with
ENTER
or press
C
to exit.
13.3.3.5 OUTPUT WEIGHING PROCEDURE
-
After having selected the input weigh, the indicator waits for the first axle and displays:
3590E
LED display
LCD display
CPWE
[In which:
XXXXX
is the current weight on the scale
o
means “
o
utput” weigh]
1
CUS MAT VEH
WAITING AXLE 1 o
XXXXXX
CUS MAT VEH
WAITING AXLE 1 o
ID:
1
IN:
995kg
OUTPUT PLATE
abc C
-
CM884FK
IN:
995kg
XXXXXX
CUS MAT VEH
WAITING AXLE 1 o