24
[input]
[
,,
F32
]
[
y3,,,,0
]
[input]
[
,,
F32
]
[
y4,,,,0
]
Said whether to enter the input and output
adjustment settings, select 0 here.
[input]
[
,,
F32
] [
,,d-of,,
] Set up.
Table 7.5 Operation Steps of Timed Shutdown Function
Note: The following functions are not available once the scheduled shutdown
arrives:
Note: Turning off the timed shutdown function means setting the day in the
above table to 1366.
7.8 Input and output position adjustment
Under normal circumstances, the number of input and output ports in the instrument
corresponds to the logo on the host panel one by one. In some special cases, for example, the
input and output ports corresponding to the working process are damaged, but the host has idle
input and output ports. At this time, you can use the input and output position adjustment
function to modify the mapping relationship between the internal number and the external
display logo.Achieve the purpose of continuing to use the instrument without modifying the
process.
This function belongs to the project of the administrator (User-2) level or above, and it is in
the same F parameter F32 as the scheduled shutdown function set in Section 7.6. When setting
the Y4 parameter, it can be changed to 1, and the function can be entered. The following steps
assume that the user has successfully logged in and entered the F32 modified project (if not,
please refer to the steps in Section 7.4):
Input position adjustment step table
Key
Lower
display
Upper
display
meaning
[input]
[
,,
F32
]
[
y4,,,,0
]
Said whether to enter the input and output
adjustment settings.
【↑】
[
,,
F32
]
[
y4,,,,1
] Select 1 here to enter this function.
[input]
[
,,
F32
] [
in1,,,,1
]
Re-map input port 1, for example, if it is
set to 2, it will be mapped to IN2.
[input]
[
,,
F32
] [
in2,,,,2
] Remapping input port 2
[input]
[
,,
F32
] [
in3,,,,3
] Remapping input port 3
[input]
[
,,
F32
] [
in4,,,,4
] Remapping input port 4
[input]
[
,,
F32
] [
in5,,,,5
] Remapping input port 5
