OPERATOR’S MANUAL
with Maintenance Information
Maintenance
56
D-2
Check the Free-wheel Configuration
Dingli specifications require that this procedure
be performed every 1000 hours or annually,
whichever comes first.
Proper use of the free-wheel configuration is
essential to safe machine operation. The
free-wheel configuration is used primarily for
towing. A machine configured to free-wheel
without operator knowledge may cause death
or serious injury and property damage.
Collision hazard. Select a
work site that is firm and level.
Component damage hazard.
If the machine must be towed, do not exceed
6.6km/h.
1
Chock the wheels at the steer end of the
machine.
2
Center a lifting jack of ample capacity
(30,000 lbs / 15,000 kg) under the drive
chassis between the wheels at the
non-steer end of the machine.
3
Lift the wheels off the ground and place
blocks under the drive chassis for support.
Crushing hazard. The
chassis could fall if not properly supported.
4
Release the brake.
5
Manually rotate each wheel at the
non-steer end.
⊙
Result: Each wheel should rotate with
minimum effort.
6
Reset the brake. Rotate each wheel to
check for engagement. Raise the machine
and remove the blocks. Lower the
machine.
7
Chock the wheels at the non-steer end of
the machine.
8
Center a lifting jack of ample capacity
(30,000 lbs / 15,000 kg) under the drive
chassis between the wheels at the steer
end.
9
Lift the wheels off the ground and place
blocks under the drive chassis for support.
Crushing hazard. The
chassis could fall if not properly supported.
10 Release the brake.
11 Manually rotate each wheel at the steer
end.
⊙
Result: Each wheel should rotate with
minimum effort.
12 Reset the brake. Rotate each wheel to
check for engagement. Raise the machine
and remove the blocks. Lower the
machine.
Summary of Contents for JCPT2223RTA
