Use
INDICATOR DG8000 RevB0
54
PROGRAMMING FROM THE INDICATOR
NOTE: To activate the following functions, it is necessary to set the Data Transfer
Enabled (basic parameter number 89) to “No”.
From TOTAL WEIGHT mode, press the keys in second page
(Recipes) /
(Unloaidng Programs) /
in order to enter in the various programming
mode described below.
How to use the edit function
(refer this section every time you have to enter/modify a text part)
Move through the keyboard by using the
↓↑
and
→ ←
keys.
The
key permits to erase the
character to the right of the cursor.
The
key is used to change the
keyboard from letters, number and
special characters.
Save by pressing on
. Press on
RESET to exit without saving.
