Configuration
INDICATOR DG8000 RevB0
46
SETTING OF CUSTOMER CODE
The DG8000 is able to show the description of the customer and the association
Customer/Recipes (or Unloading program) so that it allows the operator to see only the
Recipes (or Unloading program) related to a specific customer during the executions. In
order to select a specific customer and trace all the activities follow these simple steps:
1
Program the memory card by using the DTM, being sure to have saved, at least one
customer (for more information see the Quick user Guide and the Help on line about
the DTM)
2
Connect the memory card to the DG8000
3
When the DG8000 shows the
message;
4
a) Press
ENTER
and the indicator will copy the customer information (together with
the recipes, unloading programs, and the operator information) inside the internal
memory so that the customers’ information will also be available without the card
being connected.
b) By pressing
RESET
the indicator will not copy the customer information inside the
internal memory so the customers’ information will be available only with the card
connected.
5
At this point, when the DG8000 is in
TOTAL WEIGHT, press the
key that is in the second page, and
then press on the
key to enter
in the
CUSTOMER CODE
section.
