Configuration
INDICATOR DG8000 RevB0
37
E
N
GL
IS
H
Password 45 - Calibration with sample weight
This procedure allows to carry out the calibration of the weighing system on the basis of a
known weight that must be appropriately weighed on the medium in which the weighing
system is mounted.
Before to start, take care that the wagon is carefully emptied.
1
Confirm with the ENTER button to
proceed with the calibration.
2
At this point, the top is completely
empty wagon, confirm with the
ENTER key.
3
Wait for the scan job in progress.
4
Load the material / weight known and
enter the value of the reference
weight placed in the wagon (in kg or
pounds depending Unit currently set
size) with
↑
or
↓
buttons and confirm
with the ENTER key.
