Configuration
INDICATOR DG8000 RevB0
35
E
N
GL
IS
H
Password 4 – Printing Work Process
Enables the printing at the end of the working process (L Unloading Program)
Password 12 - Calibration
In this section, the calibration value of the local plant is set:
1
The system waits for the operator to confirm, by pressing ENTER. By pressing RESET,
you can go back to the main configuration menu.
2
Enter the calibration value according to the loading cells connected to the system. Use
the
↑
or
↓
keys or the value increase keys (do not display the icons on the screen)
3
Press ENTER to confirm the value;
4
A waiting message will show. After that, the microcomputer asks for confirmation of the
modification which has just occurred. If no errors are there, you can confirm by
pressing ENTER
5
In case of errors, you need to press RESET and start the cycle afresh
In case of a configuration with 4 independent channels, this procedure needs to be
repeated for every single channel.
