Dinamica Generale AgriNIR, Operator'S Manual

Page: 44 / 68

Use AgriNIR™ Analyzer Rev. A11
42
6.11 Analysis saving on USB pen drive
At the end of analysis execution, when the AgriNIR™ system shows the results table, you can store the
results on the USB memory key :
Press F-key to SAVE THE DATA ON USB PEN DRIVE (on USB memory key).
On USB memory key a file folder is created with naming convention < Date Time > , which contains :
analysis folders on USB key

one file .txt with naming convention < ID NIR Family _ progressive number > for each single
analysis just executed (1 file in Single Analysis mode, N file in Multiple Analysis mode);
single analysis mode multiple analysis mode
NOTE.
These files .txt is used only associated with DGNirManager software to store the optical
spectra of the analyzed samples, then to create new calibration curves.