16
www.dimplex.com
Maintenance
Figure 11
Light
Block
and detail of the log exterior
disappears. There are two (2)
bulbs, which generate the flames
and embers.
Tool Requirements
Philips screw driver
Helpful Hints
It is a good idea to replace all light
bulbs at once if they are close to
the end of their rated life. Group
replacement will reduce the
number of times you will need to
open the unit to replace light bulbs.
Light Bulb Requirements
Quantity of two (2) 60 Watt
chandelier or candelabra bulbs
with E-14 (small) socket base,
240 Volt.
Do not exceed 60 Watt per bulb
Bulb Replacement Instructions:
①
Disconnect power supply to
the fireplace either by unplugging
the fireplace or switch off at the
breaker panel.
②
Remove glass assembly.
Remove the screws securing the
glass assembly on the chassis
(Figure 3).
Figure 10
Lift to
remove
Glass
assembly
③
Hold on to the glass assembly
with both hands then lift the whole
assembly straight up to remove
(Figure 10).
④
Remove the two (2) screws
securing the light block as shown
in Figure 11, then remove the light