11
Use the appropriate wire
to meet local and national
electrical codes for rated
power consumption.
Means for disconnection must
be incorporated in the fixed
wiring.
④
Remove the outer jacket and
strip the individual conductor from
the end.
⑤
Loosen the screw securing
the junction box cover and
remove the cover.
⑥
Take the cables out from the
junction box, loosen the terminal
block and remove the cord set
(Figure 5).
Fireplace Installation
and secure with a wire clamp (not
supplied).
⑧
Connect the live wire from the
unit to the live wire from power
supply (Figure 6).
⑨
Connect the neutral wire from
the unit to the neutral wire from
power supply (Figure 6).
⑩
Connect the green wire
(ground) from the unit to the
green wire from power supply
(Figure 6).
⑪
Place all connectors inside
the unit and secure the junction
box cover to unit. Ensure that the
cable clamp grips only the jacket
of service cable.
!
NOTE:
All wiring must be
completed prior to installing
Figure 5
Figure 6
⑦
Route the power supply wire
through the knockout on supplied
alternative junction box cover