Dimplex TLC20LX-AU, Instruction Manual, Page: 8 / 16

Installation
WARNING: FALLING OR TIPPING APPLIANCES CAN CAUSE INJURY OR DEATH OF
YOUNG CHILDREN, PLEASE ENSURE CHILDREN DO NOT CLIMB, HANG OR STAND
ON THIS PRODUCT.
WARNING: THE APPLIANCE IS PROVIDED WITH A WALL FIXING KIT, THIS KIT
IS DESIGNED TO HOLD THE PRODUCTS WEIGHT. IT IS NOT A SUBSTITUTE FOR
PROPER ADULT SUPERVISION. DO NOT ALLOW CHILDREN TO CLIMB OR HANG
ON THIS PRODUCT.
Safety Message: Sufficient expertise is required for installing this product. If unsure
we recommend that you use an installer and pay special attention to safety during
the installation.
Wall Installation
Do not connect the appliance until it is properly fixed to the wall and the instruction
manual/leaflet is completely read and understood. In particular, the minimum dis-
tances must be observed.
This model is designed to be permanently fixed to a wall at a minimum height of
300mm. The wall bracket must be fitted horizontally and the cable routed to the
bottom right of the appliance.
A height of 600mm to 725mm from the bottom of the appliance to the floor is rec-
ommended for optimum viewing of the fuel bed.
For optimum viewing, mark the top three screw fixing positions on the wall in ac-
cordance with the recommended fixing dimensions. Drill holes with a 6mm drill bit.
Fix the wall bracket using the plugs and screws provided. Carefully lift the appliance
up ensuring that the appliance engages with the wall bracket correctly.
A bottom fixing bracket is supplied with the unit, fixed to the base of the appliance.
Remove the screw and the bracket, turn the bracket through 180 degrees so it is
now facing downward and re fit using the screw just removed. With the bracket in
place, mark the location on the wall. Remove the appliance, drill the wall, fit the wall
plug and re-fit the appliance ensuring that you secure it in place by screwing the
bottom fixing bracket to the wall.
8