Dimplex TLC20LX-AU, Instruction Manual, Page: 10 / 16

Wireless Speaker Control
The unit needs to be in standby for the speaker function to operate, you do not
need the flame effect to be operating.
The speaker can be used in 2 ways. You can pair a suitable device to the speaker
wirelessly and listen to music, audio books or casts, or when the flame effect is op-
erating the soothing crackling sound of a log fire can be played for ambient sound
effect.
To listen to the crackling log effect, just press the volume up button on your remote
control until you reach a volume level which is comfortable for you. To lower the
volume, press the volume down button. The crackling is turned OFF by pressing the
volume down button until the sound is muted.
To use the speaker to listen to your own material, the speaker must first be paired to
a compatible device. To pair with the unit:
1. Ensure the unit is plugged in and switched on at the mains socket.
2. Using a compatible device search for "Dimplex Fire," and then select and pair
your device to "Dimplex Fire."
3. Once connection is made between your device and the unit, an electronic tone
will sound to alert you that the pairing was successful.
With the unit now paired, you can control the speaker volume using the volume but-
tons on the remote control handset or your device's volume controls.
Note:
If you experience problems pairing to the speaker, you may need to re-pair to
the speaker, follow these steps:
1. On your device go to "Bluetooth Settings."
2. Select "Dimplex Fire," and press "Forget," to disconnect from the speaker.
3. Turn Bluetooth OFF, and then ON. Your device should now rediscover "Dimplex
Fire," again.
4. Select "Dimplex Fire," to pair with the speaker.
10