Cleaning
Before cleaning, ensure that the heater is disconnected from the
power supply and that it has cooled down. The outer surface can
be wiped with a soft damp cloth. Do not use scouring powder
or furniture polish, as these can damage the surface.
Dust that collects within the unit can be removed from the
outside using a vacuum cleaner.
Maintenance
maximum heat output is available. Before the start of the heating
season, vacuum-clean the heater to remove any dirt or dust.
Possible Faults
If the heater does not give out any warmth, check that the
thermostat is set to the correct temperature. Then check the
fuse or circuit breaker.
If the cause of the fault cannot be identified, contact the nearest
after-sales service center.
You must state the unit model number, as indicated on the
type plate (wiring compartment cover). Any examination of the
heater or repair work may only be carried out by a qualified
electrician or after-sales service technician.
Warranty
The Manufacturer warrants the convector heater and components of the enclosed
product against any defect in material or workmanship for a period of two years from
the date of purchase, with the exception of the elements which are warranted to be
free from defect in material and workmanship for ten years. In full satisfaction of any
claims under this Warranty the Manufacturer will repair or replace without charge,
in its factory or in the field as it alone may decide, any parts which in its opinion are
defective.
The Manufacturer shall not be responsible for any transportation or shipping costs in
relation to such repair or replacement except as specifically assumed by it. Misuse
of this product or repairs by persons other than the Manufacturer’s authorized
personnel without the Manufacturer’s written approval, will void this Warranty.
This Warranty is in lieu of all other warranties or conditions whether expressed or
implied including but not limited to those of merchantability or fitness for purpose
and shall constitute the sole remedy of the Purchaser and the sole liability of the
Manufacturer in respect of the sale of the product, whether in the nature of breach or
breach of fundamental term, or of negligence or otherwise.
The Manufacturer shall not be liable for any special, indirect or consequential
damages or for any damages resulting from removal or replacement of a convector
heater subject to warranty claim without the Manufacturer’s authorization.
This Warranty is transferable by the original consumer purchaser of the product. Any
claims under this Warranty must be submitted in writing to the Service Manager,
Dimplex North America Ltd., 1367 Industrial Rd., Cambridge, Ontario N1R 7G8,
Canada.
Model Key Information
MODEL
VOLTAGE
OUTPUT
WEIGHT
WIDTH
HEIGHT
DEPTH
PLX050NN
240/208
500/375W
4.8 kg/10.6 lbs
450 mm/17.7”
430 mm/16.9”
108 mm/4.3”
PLX075NN
240/208
750/562W
6.2 kg/13.6 lbs
620 mm/24.4”
430 mm/16.9”
108 mm/4.3”
PLX100NN
240/208
1000/750W
6.2 kg/13.6 lbs
620 mm/24.4”
430 mm/16.9”
108 mm/4.3”
PLX125NN
240/208
1250/938W
6.6 kg/14.5 lbs
690 mm/27.1”
430 mm/16.9”
108 mm/4.3”
PLX150NN
240/208
1500/1125W
6.6 kg/14.5 lbs
690 mm/27.1”
430 mm/16.9”
108 mm/4.3”
PLX200NN
240/208
2000/1500W
8.0 kg/17.6 lbs
860 mm/33.9”
430 mm/16.9”
108 mm/4.3”
In keeping with our policy of continuous product improvement, we reserve the right to make changes without notice.
© 2015 Dimplex North America Limited
1367 Industrial Road Cambridge ON Canada N1R 7G8
1-888-346-7539 www.dimplex.com
