Dimplex MULTI-FIRE SL PLF3614-XS Installation And User Manual Download Page 4

4

www.dimplex.com

When using any electrical appliance, basic 
precautions should always be followed to reduce 
the risk of fire, electric shock, and injury to persons. 
These precautions include: 

 Read all instructions before using this electric
fireplace.
 

DANGER: 

High temperatures may be generated

under certain abnormal conditions. Do not
partially or fully cover or obstruct the front of the
fireplace.

 This fireplace is hot when in use. To avoid burns,
do not let bare skin touch hot surfaces. The trim
around the heater outlet becomes hot during
heater operation. Keep combustible materials,
such as furniture, pillows, bedding, papers,
clothes, and curtains at least 3 feet (0.9 m) from
the front of the fireplace.

③  

Extreme caution is necessary when the fireplace
is used by or near children or people with
disabilities and whenever the fireplace is left
operating and unattended.

 Always turn off the fireplace when it is not in use.

 Do not operate the fireplace after it malfunctions,
has been dropped, or damaged in any manner.
Disconnect power at the service panel and have
the fireplace inspected by a reputable electrician
before using.

⑥  

Do not use this fireplace outdoors.

⑦  

Never locate the fireplace where it may fall into a
bathtub or other water container.

 Do not insert or allow foreign objects to enter
any ventilation or exhaust opening as this may
cause an electric shock, fire, or damage to the
fireplace.

⑨  

To prevent a possible fire, do not block air
intakes or exhaust in any manner.

 To disconnect the heater, turn the unit off with
the controls and turn off the power to the heater
circuit at the main disconnect panel.

 All electrical heaters have hot and arcing or
sparking parts inside. Do not use it in areas
where gasoline, paint, or flammable liquids are
used or stored.

⑫  

Do not modify this fireplace. Use it only as
described in this manual. Any other use may
cause fire, electric shock, or injury to persons.

 Do not burn wood or other materials in this
fireplace.

 Disconnect all power coming to the fireplace at
the main service panel before performing any
cleaning or maintenance.

 When transporting or storing the fireplace, keep
it in a dry place, free from excessive vibration,
and store to avoid damage.

⑯  

Always use ground fault protection where
required by electrical code.

⑰  

Changes or modifications not expressly
approved by the party responsible for
compliance could void user's authority to
operate the equipment.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NO USER-SERVICEABLE PARTS INSIDE

 SAVE THESE INSTRUCTIONS 

 

IMPORTANT INSTRUCTIONS

Summary of Contents for MULTI-FIRE SL PLF3614-XS

























Reviews: