Dimplex MULTI-FIRE SL PLF3614-XS Installation And User Manual Download Page 3 | Manualshive

Page: 3 / 24

Dimplex MULTI-FIRE SL PLF3614-XS Installation And User Manual Download Page 3

3

Thank you and congratulations for choosing to purchase a Dimplex fireplace.

Please carefully read and save these instructions.

CAUTION:

Read all instructions and warnings carefully before starting installation. Failure to follow these

instructions may result in a possible electric shock, fire hazard and will void the warranty.

Please record your model and serial numbers for future reference. Model and serial numbers can be found on the
label located on the label behind the front glass of your fireplace and on the back of the Installation and User’s Guide
provided with your fireplace.

Model and Serial Number Label
(behind front glass)

QR Code Label
(behind front glass)
Visit www.dimplex.com/fcapp

Welcome

NO NEED TO RETURN TO THE STORE

If you have questions regarding the operation of this product or if you require

service, before returning this product to place of purchase,

Contact us at:



www .dimplex .com/customer_support

For Troubleshooting and Technical Support

OR



Toll-Free 1-888-346-7539

Please have your model number and product serial number ready.

Model

MOD

Serial Number

«
1
2
3
4
5
...
»

Summary of Contents for MULTI-FIRE SL PLF3614-XS

























Reviews:

No comments