Dimplex MULTI-FIRE SL PLF3614-XS Installation And User Manual Download Page 23

23

MULTI-FIRE

®

 SL 2 YEAR LIMITED WARRANTY  

Section 1 Products to which this Limited Warranty 

Applies 

This Limited Warranty applies to your newly purchased 

Dimplex Electric Fireplace with Model Numbers  

PLF3614-XS, PLF4214-XS, PLF5014-XS, and PLF6014-XS.
This Limited Warranty applies only to purchases made 

in any province of Canada except for Yukon Territory, 

Nunavut, or Northwest Territories or in any of the 50 States 

of the USA and the District of Columbia except for Hawaii 

and Alaska. This Limited Warranty applies to the original 

purchaser of the product only and is not transferable. 

Section 2 Products excluded from this Limited 

Warranty 

Products purchased in Yukon Territory, Nunavut, Northwest 

Territories, Hawaii, or Alaska are not covered by this 

Limited Warranty. Products purchased in these States, 

Provinces, or Territories are sold AS IS without Warranty 

or condition of any kind including, without limitation, any 

implied warranties or conditions of merchantability or 

fitness for a particular purpose.  The entire risk of as to 

the quality and performance of the products is with the 

purchaser.  In the event of a defect the purchaser assumes 

the entire cost of all necessary servicing or repair. 

Section 3 What this Limited Warranty covers and for 

How Long 

MULTI-FIRE

®

 SL products PLF3614-XS, PLF4214-XS, 

PLF5014-XS, and PLF6014-XS excluding trims and 

accessory packages are covered by this Limited Warranty, 

have been tested and inspected prior to shipment and, 

subject to the provisions of this Warranty, Glen Dimplex 

Americas Ltd. (herein called Glen Dimplex Americas) 

warrants such products to be free from defects in material 

and workmanship for a period of 2 years from the date 

of the first purchase of such products. 2-year Limited 

Warranty entitles the purchaser to On-site or In-home 

Warranty Services. Accordingly, Glen Dimplex Americas will 

be responsible for all labor and transportation associated 

with repairing or replacing the product or part. Exceptions 

to this are outlined in Section 5. Some jurisdictions do not 

allow limitations on how long an implied Warranty lasts, so 

the above limitation may not apply to the purchaser. 

Section 4 What this Limited Warranty Does Not Cover 

This Limited Warranty does not apply to products that 

have been repaired (except by Glen Dimplex Americas 

or its authorized service representatives) or otherwise 

altered. This Limited Warranty does further not apply to 

defects resulting from misuse, abuse, accident, neglect, 

incorrect installation, improper maintenance or handling, or 

operation with an incorrect power source. 

Section 5 How to notify us of a Warranty Concern 

Defects must be brought to the attention of Dimplex 

Customer Service online at dimplex.com/en/contact_us 

or by telephone at 1-888-346-7539. Please have proof of 

purchase, catalogue/model and serial numbers available 

for representatives to assist. **Limited In-home Warranty 

Services require proof of purchase. 
In the event a product or part covered by this Limited 

Warranty is proven to be defective in material or 

workmanship during (i) the 2-year Limited Warranty period 

for products outlined in Section 1, you have the following 

rights: 

•  Glen Dimplex Americas will in its sole discretion either 

repair or replace such defective product or part without 

charge. If Glen Dimplex Americas is unable to repair or 

replace such product or part, or if repair or replacement 

is not commercially practicable or cannot be timely 

made, Glen Dimplex Americas may, in lieu of repair or 

replacement, choose to refund the purchase price for 

such product or part. 

•  Limited Warranty service will be performed solely by 

dealers or service agents of Glen Dimplex Americas 

authorized to provide Limited Warranty services. 

•  This 2-year Limited Warranty entitles the purchaser to 

On-site or In-home Warranty services. Accordingly, Glen 

Dimplex Americas will be responsible for all labor and 

transportation associated with repairing or replacing 

the product or part except as follows: (i) charges which 

may be levied for travel costs incurred to travel to the 

purchaser’s site where the product is located if the 

purchaser’s site is beyond 30 miles (48 km) from the 

closest service depot of Glen Dimplex Americas dealer or 

service agent; and (ii) the purchaser is solely responsible 

for providing clear access to all serviceable parts of the 

product. 

•  Glen Dimplex Americas will not be responsible for, and 

this Limited Warranty shall not include, any expense 

incurred for installation or removal of the surrounds 

(mantels) or trims or any part thereof (or any replacement 

product or part) including, without limitation, all shipping 

costs and transportation costs to and from the authorized 

dealer’s or service agent’s place of business and all 

labor costs. Such costs shall be the purchaser’s sole 

responsibility. 

Section 6 When Glen Dimplex Americas and its Dealers 

and Service Agents are not Liable 

IN NO EVENT WILL GLEN DIMPLEX AMERICAS, OR ITS 

DIRECTORS, OFFICERS, OR AGENTS, BE LIABLE TO 

THE PURCHASER OR ANY THIRD PARTY. WHETHER 

IN CONTRACT, IN TORT, OR ON ANY OTHER BASIS, 

FOR ANY INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY, 

CONSEQUENTIAL, OR INCIDENTAL LOSS, COST, OR 

DAMAGE ARISING OUT OF OR IN CONNECTION WITH 

THE SALE, MAINTENANCE, USE, OR INABILITY TO USE 

THE PRODUCT, EVEN IF GLEN DIMPLEX AMERICAS OR 

ITS DIRECTORS, OFFICERS, OR AGENTS HAVE BEEN 

ADVISED OF THE POSSIBILITY OF SUCH LOSSES, 

COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS, 

OR DAMAGES ARE FORESEEABLE. IN NO EVENT 

WILL GLEN DIMPLEX AMERICAS, OR ITS OFFICERS, 

DIRECTORS, OR AGENTS BE LIABLE FOR ANY DIRECT 

LOSSES, COSTS, OR DAMAGES THAT EXCEED 

THE PURCHASE PRICE OF THE PRODUCT. SOME 

JURISDICTIONS DO NOT ALLOW THE EXCLUSION 

OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION 

MAY NOT APPLY TO THE PURCHASER. 

How State and Provincial law(s) apply 

This Limited Warranty gives you specific legal rights, and 

you may also have other rights which vary from jurisdiction 

to jurisdiction. The provisions of the United Nations 

Convention on Contracts for the Sale of Goods shall not 

apply to this Limited Warranty or the sale of products 

covered by this Limited Warranty.

Warranty

Summary of Contents for MULTI-FIRE SL PLF3614-XS

























Reviews: