Dimplex MIDI FIRE MIDI32B Instructions Download Page 3

IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE

UK

General

Unpack the heater carefully and retain the packaging for possible future use, 
in the event of moving or returning the fi re to your supplier.
These models are designed to be free standing and are normally positioned 
against a wall. The fi re incorporates a fl ame effect, which can be used with 
or without heati

ng, so that the comforting effect may be enjoyed at any time 

of the year. Using the fl ame effect on its own only requires a little electricity. 
A choice of  750W to 1500W heat output is provided by the fan heater, which 
is located at the bottom of the unit.  

Before connecting the heater check that the supply voltage is the same as 
that stated on the heater. 

Please note: Used in an environment wh

ere background noise is very low, it 

may be possible to hear a sound which is related to the operation of the fl ame 
effect. This is normal and should not be a cause for concern. 

Electrical connection

WARNING – THIS APPLIANCE MUST BE EARTHED. 

This heater must be used on an AC ~ supply only and the voltage marked on 
the heater must correspond to the supply voltage. Before switching on, please 
read the safety warnings and operating instructions.

Access to the Controls

 

- see 

Fig. 2 

To access the controls switches of the appliance, guide your hand along the 
inner Right Hand side panel until a opening in the panel is found. Moving your 
hand through the opening of the side panel. The two control switches are 
recessed on the back panel of the appliance as shown in 

Fig.2

Controls

 

- see 

Fig. 2 

The main ON/OFF Switch (

SW 1

) must fi rst be turned ON to operate any of 

the other controls. Switch (

SW2

) has the following operations.

Setting  

            Operation 

          Indication

Flame Effect                              Press the ‘I’ button once      Bottom Neon

Flame Effect & 750W heat       Press the ‘I’ button again      Bottom  &    
 

 

 

 

  

               middle neon

Flame Effect & 1500W heat    Press the ‘I’ button again      All 3 neons

To turn off any of the settings  Press the’O’button once. 

 

Neon indicators

 - see Fig. 4

Three Neon’s as shown in 

Fig. 6

 indicate the setting for a couple of seconds 

every time you change the setting.
One Neon means ON (fl ame effect only, no heat), two Neon’s means 750W 
heat and all three Neon’s are on to indicate full 1500W heat setting.

Important Safety Advice  

When using electrical appliances, basic 
precautions should be followed to reduce 
the risk of fi re, electric shock, and injury to 
persons, including the following:
If the appliance is damaged, check 
immediately with the supplier before 
installation and operation.
Do not use this heater in the immediate 
surroundings of a bath, shower or swimming 
pool.
Do not use outdoors.
This heater must not be located immediately 
above or below a fi xed socket outlet or 
connection box.

The heater carries the Warning symbol, 
indicating that it must not be covered.

Warning: In order to avoid overheating do not 
cover the heater.

Ensure that furniture, curtains 

or other combustible material are positioned no 
closer than 1 metre from the heater.

In the event of a fault unplug the heater.
Unplug the heater when not required for long 
periods.
The supply cord must be placed on the right 
hand side of the heater away from the heat 
outlet underneath the heater.
Although this heater complies with safety 
standards, we do not recommend its use 
on deep pile carpets or on long hair type of 
rugs.
This appliance can be used by children aged 
8 years and above and persons with reduced 
physical, sensory or mental capabilities or 
lack of experience and knowledge if they 
have been given supervision or instruction 
concerning use of the appliance in a safe 
way and understand the hazards involved. 
Children shall not play with the appliance. 
Cleaning and user maintenance shall not 
be made by Children without supervision.
Children of less than 3 years should be 
kept away unless continuously supervised. 
Children aged from 3 years and less than 8 
years shall only switch on/off the appliance 
provided that it has been placed or installed 
in its intended normal operating position and 
they have been given supervision or instruction 
concerning use of the appliance in a safe 
way and understand the hazards involved. 
Children aged from 3 years and less than 8 
years shall not plug in, regulate and clean 
the appliance or perform user maintenance.
T h e   a p p l i a n c e   m u s t   b e   p o s i t i o n e d 
s o   t h a t   t h e   p l u g   i s   a c c e s s i b l e .
If the supply cord is damaged it must be replaced 
by the manufacturer or service agent or 

Midi Fire  (Midi32B)

similarly qualifi ed person in order to avoid a hazard.
Caution: In order to avoid a hazard due to inadvertent 
resetting of the thermal cut-out, this appliance 
must not be supplied through an external switching 
device, such as a timer, or connected to a circuit 
that is regularly switched on and off by the utility.
This heater is not equipped with a device to 
control the room temperature. Do not use this 
heater in small rooms when they are occupied by 
persons not capable of leaving the room on their 
own, unless constant supervision is provided.

The appliance must not to be located beneath a 
socket outlet.
Caution: Some parts of this product can become 
very hot and cause burns. Particular attention 
has to be given where children and vulnerable 
people are present.

This Instruction can be found at WWW.DIMPLEX.
CO.UK

Reviews: