70mm
35mm
1
17mm
Installation and
Operating Instructions
Key Switch
Model No. KX03001
GENERAL DESCRIPTION
The KX03001 can be used in conjunction with the
Dimplex PLX, SPX, EVS, EVX, RPX and Calidou
panel heaters. The unit is designed to be flush
mounted to a single BS backing box using the
adaptor plate provided. The unit comprises 2 x 20
Amp (250VAC) rated single pole changeover
mechanisms, together with a neon that is
designed to provide an easily visible backlit card
pocket.
OPERATING INSTRUCTIONS
Dependant on the heater used and wiring, the
KX03001 can operate in either On/Off switching
mode, or in Pilot Wire mode when used with a
suitable heater.
Important Safety Advice
•
Do not use this appliance in the
immediate surroundings of a bath, a
shower or swimming pool.
•
Do not use where excessive dust or
moisture is present.
•
This unit must only be used on an
A.C. Mains supply of 230/240V.
•
For use in normal pollution situations
only.
Note 1:
When the fob is removed a neon will light to aid the
user, whether used in On/Off or Pilot Wire
installations.
Note 2:
This unit contains a second 20 Amp rated
mechanism to allow another device to be switched
(e.g. lighting).
INSTALLATION
Before undertaking installation work, ensure the
electricity supply is disconnected from any fixed
wiring.
•
All wiring should be carried out by a qualified
Electrician in accordance with the current IEE
Wiring Regulations.
•
This unit is designed for fitting to a standard
single BS backing box with a depth of 25mm.
•
Please ensure the top and bottom lugs are
removed, if fitted, from metal wall boxes prior to
fitting.
•
Ensure that there is adequate space for wiring.
•
Please see the following diagrams for your
chosen connection type (On/Off, Pilot Wire).
DIMENSIONS (millimetres)
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
ON/OFF SWITCHING
Using the key fob provided, place the fob into the
pouch to switch the heater
On
. Removing the fob
isolates the power and turns the heater
Off
.
PILOT WIRE SWITCHING
Using the key fob provided, place the fob into the
pouch to switch the heater to its
comfort
temperature
setting. Removing the fob switches
the heater to its
background temperature
setting
when the room is unoccupied.
CONTINUED OVERLEAF
08/18964/0 - Issue 0