Installation and Operating Instructions
Firefly, Model FIF20 2.0 kW Fan Heater
Model FIF15 1.5 kW Fan Heater
Merlin, Model MRL20 2.0 kW Fan Heater
Model
MRL15 1.5
kW
Fan
Heater
Alderbury, Model ALB20 2.0 kW Fan Heater
Focal Point Stove with Optiflame
{
Incorporating fan heater
Issue 5
8/18299/0 25/5/01
Electrical
Dimensions
(millimetres)
WARNING: THIS APPLIANCE MUST BE EARTHED.
This fire is suitable for operation on an AC~ electricity
supply having the same voltage as that shown on its
rating label.
The fire is fitted with a rewireable plug incorporating a
13 amp fuse. In the event of replacing the fuse in the
plug supplied, a 13amp fuse approved by ASTA to
BS1362 must be used.
Important Safety Advice
When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the
following:
•
If the appliance is damaged, check immediately
with the supplier before installation and operation.
•
DO NOT use outdoors.
•
DO NOT use in the immediate surroundings of a
bath shower or swimming pool.
•
DO NOT locate the heater immediately below a
fixed socket outlet or connection box.
Fig.1
•
•
•
•
DO NOT COVER THE HEATER. Do not place
material or garments on the heater, or obstruct the
air circulation around the heater, for instance by
curtains or furniture, as this could cause
overheating and a fire risk.
IMPORTANT
DO NOT leave young children, the elderly, or the
infirm unsupervised in the vicinity of the heater.
THESE INSTRUCTIONS SHOULD BE READ
CAREFULLY
•
Do not use this heater in series with a thermal
control, a program controller, a timer or any other
device that switches on the heater automatically,
since a fire risk exists when the heater is
accidentally covered or displaced.
AND RETAINED FOR FUTURE REFERENCE.
General
Unpack the heater carefully and retain the packaging
for possible future use, in the event of moving or
returning the fire to your supplier.
•
Ensure that furniture, curtains or other combustible
material are positioned no closer than 1 metre
from the heater.
This model is designed to be free standing and is
normally positioned against a wall.
In the event of a fault unplug the heater.
A choice of 1kW or 2kW heat output is provided by the
fan heater, which is concealed beneath the unit.
Unplug the heater when not required for long
periods.
(Models FIF15 and MRL15, 750W or 1.5kW output).
•
Keep supply cord away from the front of the
heater.
A minimum distance of 1 metre (39”) must be
maintained between the front of the heater and any
surrounding furniture, overhanging curtains or other
obstructions.
•
Although this heater complies with safety
standards, we do not recommend its use on deep
pile carpets or on long hair type of rugs.
•
The appliance must be positioned so that the plug
is accessible.
Before connecting the heater check that the supply
voltage is the same as that stated on the heater.
•
If the supply cord is damaged it must be replaced
by the manufacturer or service agent or a similarly
qualified person in order to avoid a hazard.
