7
Mantel Installation
For use with a new or existing
mantel. Depending on the avail
-
able space within the mantel cav
-
ity, the unit can be secured to the
mantel at the bottom side or back.
Remove the screw on the bottom
flange in the most appropriate
place for securing and using the
provided L-bracket and the screw
that was removed attach the fire
-
box to the mantel. (Figure 2)
!
NOTE:
There are no guide
holes provided for the L-Brackets
in the mantel.
If not installing the unit into a Dim-
plex mantel the required opening
dimensions for the fireplace are:
27.0 in. (686 mm) wide x 23 ⅛ in.
(587 mm) high x 7 ½ in. (191 mm)
deep (Figure 3).
CAUTION:
Clearance for air
circulation beneath the fireplace
insert is provided by four felt feet.
Do not install the fireplace in-
sert directly on carpet or simi-
lar surfaces which may restrict
air circulation.
CAUTION:
If installing the
fireplace in a carpeted area, place
a one-piece, solid, flat surface
under the fireplace. Ensure that
Fireplace Installation
Figure 3
27.0 in.
(686 mm)
23 ⅛ in.
(587 mm)
7 ½ in.
(191 mm)
Figure 2
all of the feet rest securely on this
surface.
!
NOTE:
The firebox is to be
installed from the front of the
mantel and inserted so that the
flanges are flush against the front
surface of the mantel.